Solar street lights cannot be installed in these cases

Solar street light is a new type of road lighting equipment. It uses crystalline silicon solar panels for power supply, maintenance-free valve-regulated sealed batteries (colloidal batteries) to store electrical energy, ultra-bright LED lamps as light sources, and is controlled by an intelligent charge-discharge controller. It has the advantages of easy installation, less investment, good safety performance, energy saving and environmental protection, and is a street lamp used to replace traditional shared electric lighting.
The solar street light system can ensure the normal operation of the rainy weather for more than 15 days! Its system composition is composed of LED light source (including drive), solar panel, battery (including battery incubator), solar street light controller, street light pole (including foundation) and auxiliary materials and wires.
Solar panel components generally use monocrystalline silicon solar panels or polycrystalline silicon solar panels; LED lamp heads generally use high-power LED light sources; controllers are generally placed in the lamp pole, with light control, time control, overcharge and overdischarge maintenance and reverse connection maintenance , The more advanced controller has the function of adjusting the lighting time in four seasons, half-power function, intelligent charging and discharging function, etc.; the battery is generally placed underground or there will be a special battery incubator, which can use valve-regulated lead-acid batteries, colloids, etc. Batteries, iron-aluminum batteries or lithium batteries, etc. The solar lamps work fully automatically and do not need to dig trenches for wiring, but the lamp poles need to be installed on the embedded parts (concrete base).
In high wind areas, the general wind resistance level of solar street lights is level 12. For areas exceeding level 12 hurricanes, if solar street lights are used, it will have an immeasurable impact, but the domestic wind force is generally below level 8, so the general domestic area is can be used. Monocrystalline PET lamination
The solar street light will generate heat during the use process. If the temperature is too high, it will not only affect the normal function of the components, but also easily cause a fire and cause losses. Change is slow. Solar street lights cannot be used in earthquake areas with magnitude 8. The seismic level of general solar street lights is 8. If installed in earthquake zones, it is easy to cause unexpected damage to solar street lights. Solar street lights cannot be used normally in areas with humidity greater than 80%. , The humidity is too high, and the electronic components are easily oxidized by moisture, resulting in unstable connection of electronic components, which easily affects the normal lighting of the solar street light system.